Skip to content

Sections
Home Processors I/O About Us News Support
Personal tools
You are here: Home New Items XPMC-6710 Power PC PMC Processor Module
Document Actions

XPMC-6710 Power PC PMC Processor Module

by tony Losey last modified 2007-03-29 10:20

Overview

Xembedded, Inc. offers the XPMC-6710 a PrPMC (Processor PCI Mezzanine Card) with a high performance PowerPC® 7448 processor which is the fastest PPC in its class. The XPMC-6710 offers advantages over other solutions due to its flexibility to update the CPU at ease while maintaining the rest of the subsystem I/O. The XPMC-6710 is well suited for applications requiring additional processing power! When used with our XVME-6520 7448 Power PC VME processor module or our XCPC-9100 CompactPCI dual PMC carrier board. The XPMC-6710 works well for applications such as communication, Defense/Aerospace, Industrial controls, DSP, etc.

The XPMC-6710 elite grade Compute engine gives OEMs blazing Compute density to do leading edge pervasive computing. The PPC7448 includes 128-bit AltiVec vector execution unit as found in previous PPC74xx devices, but with the enhanced support for out-of-order instructions.

The XPMC-6710 utilizes the XPIM-710 PMC I/O Module to convert the rear I/O signals to standard connectors. J1-A and J1-B of the PIM710 are the RJ-45 Gigabit Ethernet connectors, while J1-C and J1-D are RJ-45 connectors for the two RS-232 interfaces. The PIM710 is sold separately, Contact the factory for details.
XPMC-6710

Features

  • PPC7448 PowerPC in the range of 1.2GHz or 1.7 GHz
  • Single width PrPMC compliant Standard PMC Processor form factor
  • Tundra Semiconductor Tsi109 bridge
  • PCI-X @133Mhz
  • DDR2 Memory @ 400Mhz w/ECC
  • Battery Backed Real Time Clock
  • Two 10/100/1000 Gigabit Ethernet
  • Two RS-232 Serial Ports
  • VxWorks and Monta Vista ® Linux Support

Processors

  • Freescale PPC7448
  • e600 core 1.2GHz – 1.7 GHz
  • 2.3 MIPS/MHz
  • L1: 32KB Instruction/Data
  • L2: 1MB with ECC
  • MPx bus @200MHz
  • Full data and I/O coherency

Bridge Chip

  • Tundra Semiconductor Tsi109

PCI Interface

  • PCI 2.3 and PCI-X 1.0 modes
  • PCI-X 64-bit @133MHz
  • PCI agent or PCI Host

Module I/O Subsystem

  • Dual 10/100/1000 Ethernet
  • Dual RS232
  • Four independent DMA/XOR channels
  • Real Time Clock Battery backed
  • Thermal sensor
  • JTAG

Memory

  • 512MB or 1GBytes of DDR2 @400MHz w/ECC
  • 64Mbytes of User Flash
  • Boot Flash
  • Two 256 bytes of I2C EEPROM

Face Panel Connectivity

  • Single 10/100/1000
  • LNK/Activity LED
  • Single RS232
  • User defined LED

Rear I/O (J4)

  • Dual 10/100/1000
  • Dual RS232
  • User defined I/O
  • LNK/Activity LED
  • I2C bus

Rear I/O Connectivity Per PMC Interface specification

  • XPIM710 (purchase separately)
- Two RJ-45 for the Gigabit Ethernet
- Two RJ-45 for the RS232
- LNK/Activity Led
- User defined switch

XPMC-6710

Click Here For A Larger Image

Environmental
Single Width, CMC Format:
Width 2.91 in. (74 mm) Depth 5.86 in. (149 mm)
Thickness 0.8 in. (20.3 mm)
Power Requirements:
3.3 V signaling, 5 V tolerant, auto-VIO 64-bit PCI-X bus, 133 MHz maximum, 20W max at 1.75GHz, Minimum Battery Voltage: +2.2V
Operating Temperature:
0° to 55° C (Air flow requirement as measured with heatsink is to be greater than 200 LFM)
Vibration:
.05Gs RMS (20 - 2000 Hz) random, Operating 6Gs RMS per Hz spectrum
Shock:
30Gs each axis
Storage Temperature:
-25° to 80° C
Relative Humidity:
5 to 95 percent, non-condensing
MTBF:
MIL Spec 217-F@ 105,000 Hrs.

Compliance:
IEEE 1386.1 (CMC Standard), VITA 32 (PrPMC Standard)

Order Information

XPMC-6710-ABCDEG
   A = Processor
     1 = 1.2GHz MPC7448 PPC Processor
     2 = 1.7GHz MPC7448 PPC Processor
   B = Memory Size
     1 = 512MB with EEC
     2 = 1GB with ECC
   C = Boot Flash
     1 = 2Mbyte
     2 = 4Mbyte
     3 = 8Mbyte
   D = JTAG
     1 = No JTAG header
     2 = JTAG header installede
   E = Conformal Coating
     0 = No Coating
     1 = Humiseal 1A33 Polyurethane Conformal Coating
     2 = Humiseal 1B31 Acrylic Conformal Coating
   G = Extended Temperature
     Blank = Standard 0 to 55
     E = Extended Temperature -25 to 70

   XPIM-710 PIM Module to convert the rear I/O signals to standard connectors. (requires a PIM carrier board)

Download This Page As A PDFDownload This Page As A PDF
XEmbedded A XycomVME Company
Xembedded, Inc. 710 N. Maple Rd. Saline, MI 48176
Ph. 877.944.1942 Fax 734.944.1999 See us at www.xembedded.com DS_546710 rev. D