VME Processors
XVME-690
VME Pentium M
 |
Features |
 |
Block Diagram |
 |
Compatible Products |
 |
Datasheet |
 |
Manual |
|
HTML Manual |
Overview
The XVME-690 is a powerful VMEbus PC compatible processor module from Xembedded, the pioneer and leader in VMEbus PC technology. This powerful VMEbus processor integrates an Intel® Pentium® M or Celeron® M processor running in a range of 1.5GHz to 1.8 GHz with a PCI-to-VMEbus interface. This VME processor module allows users to take advantage of the powerful multiprocessing capability of the VMEbus while using standard off-the-shelf PC software and operating systems.
The XVME-690 VMEbus processor integrates an Intel® Pentium® M or Celeron® M processor running in a range of 1.5GHz to 1.8 GHz with a PCI-to-VMEbus interface. This VME processor module allows users to take advantage of the powerful multiprocessing capability of the VMEbus while using standard off-the-shelf PC software, operating systems and VMEbus I/O modules.
Features
- Single Slot 6U single board computer
- Intel® Pentium® 1.8GHz or Celeron 1.5GHz processor with up to 2MB of level 2 cache
- Enhanced Intel® SpeedStep®
- 855GME and 6300ESB chipset
- VGA Graphics out front panel or rear video support (Pixel resolution up to 1600 X 1200 at 85Hz)
- 256MB, 512MB, 1GB of ECC or Non-ECC DDR, 266/333MHz SDRAM
- EIDE Ultra-100 DMA controller supports up to three EIDE devices (compatible with XVME-977 and XVME-979 Mass Storage Modules)
- Optional EIDE On-board 1.8" hard drive or optional Compact Flash carrier
- Two Serial ATA150 (SATA150) external devices
- Floppy disk interface (compatible with XVME-977
- Dual 10/100/1000BaseT out front or Vita 31.1 on optional P0 rear connector
- One PMC 32/64-bit 33/66MHz site (IEEE P1386/ P1386.1) with front panel I/O bezel and user I/O on optional P0 rear connector
- PMC expansion for two additional PMC sites using the XVME-976
- Headless operation using serial console mode including BIOS setup
- Rear operation using USB keyboard/mouse and rear video options
- VME-64 support with Tundra Universe IID A32/ A24/A16/D64/D32/D16/D8, MBLT64 and fast hardware byte-swapping
- Parallel Printer Port (ECP, EPP and IEEE1284)
- USB 2.0 Ports, one on front two out rear connector
- Three serial ports (BIOS selectable)
- COM1 RS-232/422/485 on front
- COM3 RS-232 on front
- COM2 RS-232 out rear connector - Long duration watchdog timer
- Front panel reset switch and status LEDs
- Audio - line level stereo input and output
- Software support Libraries for Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, Linux®, QNX® and MS-DOS® ( others available on request)
- Optional IEEE1101.10 (VME64x Compact PCI type) handles available at order time.
Block Diagram
Compatible Products
| Compatible Products | Description | Model Number |
| Storage | On-board Compact Flash Carrier | |
| On-board Hard Drive Kit | ||
| Floppy Drive/Hard Drive | ||
| CD-ROM | ||
| CD-ROM and Hard Drive | ||
| CD-ROM RW | ||
| CD-ROM RW and Hard Drive | ||
| DVD and Hard Drive | ||
| DVD RW and Hard Drive | ||
| DVD RW and Solid State Hard Drive | XVME-979/7 | |
| DVD RW and Rugged Hard Drive | ||
| Transition Module | Rear Transition with P0 | |
| Rear Transition without P0 | XVME-990-02 | |
| Carrier Module | Dual PMC for XVME-689/690 processors | |
| Software | BSP DOS for XVME-65X/66X processors |
|
BSP Windows 2000, XP, Vista, 7 for XVME-689/690/62XX processors |
||
BSP QNX for all XVME processors |
||
BSP Linux for XVME-689/690/62XX processors |
||
BSP RTX for All XVME processors |