PMC I/O
TPMC-816
Two Independent Channels Extended CAN Bus
 |
Features |
 |
Compatible Products |
 |
Datasheet |
Overview
The TPMC816 is a standard single-width 32 bit PMC module with two complete CAN bus interfaces using two Intel 82527 CAN controllers. Both channels are completely independent and support CAN specification 2.0 part A and B (Standard 11 bit identifier and extended 29 bit identifier).
Each channel provides CAN High Speed and modified RS485 as physical interface. The physical interfaces are optically isolated from the CAN controller and powered by an on board DC/DC converter for each channel. The TPMC816-11 provides one CAN bus channel.
Features
- Standard single-width 32 bit PMC module conforming to IEEE P1386.1
- PCI 2.1 compliant interface
- Board size: 149 mm x 74 mm
- CAN bus interface based on Intel 82527 chip
- I/O access : DB9 male front connector with pinout following CiA DS-102, parallel to rear connector P14
- Support CAN specification 2.0 part A and B (standard and extended data frames)
- Programmable global mask
- 15 message objects of 8 byte data length
- Powerful error handling
- Programmable transfer rates
- Physical interface CAN High Speed (according to ISO 11 898) and modified RS485 per channel
- Physical interface optically isolated from CAN controller by on board DC/DC converter per channel
- Maximum transfer rate 1 Mbit/s (bus length up to 40 m)
- Operating temperature -40°C to +85°C
Compatible Products
| 6U PMC High Wattage Capable | XCPC-9200 |