TPMC-680
64-bit TTL Module
 |
Feature |
 |
Compatible Products |
Overview
The TPMC680 is a standard single-width 32 bit PMC module offering 64 bit of TTL I/O arranged in 8 x 8 bit ports. Direction of the I/O lines is software programmable for each of the 8 bit ports. Each 8 bit port is built up using a high current TTL bus transceiver.
Each input can generate an interrupt. Signal edge handling is programmable to interrupt on rising and/or falling edge of the input signal. Interrupts can be enabled and disabled for each bit. For interrupt source detection the status of each bit can be read from the interrupt status register.
The TPMC680 supports three basic modes of operation: standard byte I/O with interrupts, 2 x 16 bit port with handshake and 1 x 32 bit port with handshake. The two handshake modes offer double buffered inputs or outputs and interlocked or pulsed handshake protocol.
In byte I/O mode it is possible to read or write synchronously all 64 lines.
The TPMC680 provides front panel I/O via a HD68 SCSI-3 type connector and rear panel I/O via P14.
Features
| Logic Interface | PCI Mezzanine Card Interface |
| Size | Single Size CMC |
| PCI Target Chip | PCI9030 |
| PCI I/O Signaling Voltage Keying | +3.3V and +5V |
| I/O Access | 64 I/O lines on HD68 front connector parallel to 56 I/O lines and system ground on rear connector P14 |
| TTL I/O | 64 bit arranged in 8 x 8 ports, direction programmable per 8 bit port |
| Basic Operating Modes | Three modes selectable: Byte I/O, 2 x 16 bit handshake ports and 1 x 32 bit handshake port (all modes with interrupt support) |
| Temperature Range | Operating: -40°C to +85°C |
| Humidity | 5 - 95% non-condensing |
Compatible Products
| 6U PMC High Wattage Capable | XCPC-9200 |