Compact PCI PrPMC/PMC Carrier with Eight Port Ethernet Switch
Saline, Michigan – May 18, 2007 –Xembedded, Inc. (A XycomVME, Inc. Company)

Xembedded, Inc. a XycomVME, Inc. Company has announced the XCPC-9100 CompactPCI carrier board with an eight port 10/100/1000Mbps Ethernet switch. The XCPC-9100 is a full hot swap capable PMC carrier board that can hold up to two PrPMC (PMC processor module) or PMC modules with front or rear-panel I/O support in a single 6U CompactPCI slot. The two PrPMC sites can be configured as Monarch or Non-Monarch sites with bus mastering and 3.3V or 5V signaling.
The XCPC-9100 also includes an on-board micro-controller for programming the Broadcom BCM5398, 10/100/1000Mbps Ethernet switch and the IPMI controller for reporting module health and FRU. The on-board 8-port 10/100/1000Mbps Ethernet switch routes the two channels of PrPMC 10/100/1000Mbps Ethernet lines from each PMC site, the two 10/100/1000Mbps Ethernet lines for PICMG 2.16 and two 10/100/1000Mbps Ethernet ports out the front of the module allowing the maximum flexibility in Ethernet conductivity. The XCPC-9100 can be setup for port based VLAN giving a very powerful module for many applications.
Typical applications for the XCPC-9100 with the XPMC-6710 are many. Add a FPGA PMC in the second PMC site for an intelligent I/O module, FFT engine, or in a switch fabric matrix of multiple or cascade processing engines. The VLAN capabilities of the XCPC-9100 allow for a segmented Ethernet system to optimize the though put of a team/project system.
Also see our XPMC-6710 PrPMC module to configure a complete dual 7448 PowerPC processor array in a single slot on the CompactPCI bus. The XPMC-6710 PrPMC module is well suited for use with the XCPC-9100.
Xembedded, Inc. (A XycomVME, Inc. company) is recognized worldwide as a leading supplier of Embedded open architecture solutions. Headquartered in Saline, Michigan, Xembedded has over 35 years of experience supplying embedded computer products to the OEM, Homeland Security, Medical, Industrial Automation, Power Generation, Aerospace and Military markets. With over 650,000 systems installed in more than 50 countries, the company’s hardware and software offerings are considered some of the highest quality and most reliable systems available.
Contact:
John Sayer, VP New Product Development
(734) 944-1942 Ext 274
jsayer(at)Xembedded.com
Julius Nagy, VP of Sales
(734) 944-1942 Ext 280
jnagy(at)Xembedded.com