32/16-CH OUT
|
|
TPMC700 32/16 Digital Inputs, High Side Switch Module
The PMC compatible module TPMC700 has 32 (16) digital outputs with galvanic isolation via optocouplers. All outputs resist short-circuits and are protected against thermal overload. The output drivers are capable of driving 0.5A continuous per channel as high side switch. A hardware watchdog clears all outputs in case of trigger failure. The TPMC700-1x provides front panel I/O, the TPMC700-2x provides P14 I/O. Technical Specifications
| Logic Interface |
PCI Mezzanine Card Interface |
| Size |
Single Size CMC |
| PCI Target Chip |
PCI9050-1 (PLX Technology) |
| PCI I/O Signaling Voltage Keying |
5V |
|
Number of Outputs |
TPMC700-10/20: 32 digital outputs TPMC700-11/21: 16 digital outputs |
| Output Isolation |
Optocouplers for galvanic isolation, also isolated to each other |
| External Output Voltage |
24V DC typical, 6V DC minimum, 48V DC maximum |
| Output Current |
0.5A typical (0.3A for voltages over 32V) |
| Short Circuit Current |
0.8A typical |
| Output Voltage Drop |
1.1V typical @ 0.5A |
| Output Protection |
Overload, short circuit, GND and Vs open wire protection, thermal shutdown |
| Watchdog |
Maximum trigger distance = 120ms |
| I/O Interface |
TPMC670-10/11: HD50 SCSI-2 type connector TPMC670-20/21: 64 pin P14 Mezzanine Card Connector |
| Power Requirements |
250 mA typical @ +5V |
| Temperature Range |
Operating: -25°C to +85C Storage: -55°C to +125°C |
| Weight |
75g |
| Humidity |
5 - 95% non-condensing |
| MTBF |
TPMC700: 254108h |
Manuals
 TPMC700 |
Data Sheet |
| TPMC700-DOC |
User Documentation for TPMC700 |
| TPMC700-SW-32 |
pSOS Software Support for TPMC700 |
| TPMC700-SW-42 |
VxWorks Software Support for TPMC700 |
| TPMC700-SW-62 |
Windows NT 4.0 Software Support for TPMC700 |
|
|
The New XycomVME Group
