TPMC402
TPMC402 E1/T1 MPC860 Module with 16 MB of DRAM, 2 MB of Flash
|
|
TPMC402 E1/T1 MPC860 Module
The TPMC402 is an intelligent two-port E1/T1 primary rate ISDN serial communication system. The Motorola MPC860P embedded PowerPC processor is used as the local CPU and communication controller. Dallas DS21354/2 Line Transceivers are connected to the TDM channels of the MPC860 communication controller. The Tundra QSPan-II is used as PCI-Processor Bridge. The Qspan-II supports DMA. The TPMC402 provides 4MB of FLASH memory and 32MB of SDRAM memory. An on board SPI EEPROM is also provided. The TPMC402 is available in various board options for the type of line interface and the memory configuration. Please ask your distributor for more details. Technical Specifications
| Logic Interface |
PCI Mezzanine Card Interface |
| Size |
Single Size CMC |
| PCI I/O Signaling Voltage Keying |
3.3V, 5V tolerant |
|
I/O Interface |
2 X D-SUB 9P. Male (E1/T1 Line Interface) |
| On-Board Connectors |
MPC860 BDM Port MPC860 RS232 Port |
| PCI Bridge |
Tundra QSpan 50MHz |
| Local CPU |
Motorola MPC860MH 50MHz |
| E1/T1 Transceiver |
Dallas DS2154L/DS2152L (Board Option) |
| Shared DRAM Memory |
32 MB, 32 bit wide |
| FLASH Memory |
4MB, 16 bit wide |
| Power Requirements |
0.9A typical @ +3.3V 0.3A typical @ +5V |
| Temperature Range |
Operating: 0°C to +70C |
| Weight |
75g |
| Humidity |
5 - 95% non-condensing |
| MTBF |
152015h |
Manuals
 TPMC402 |
Data Sheet |
|
|
The New XycomVME Group
