TIP710
TIP710 1-channel Isolated output; 1Amp @ 6 to 48 per Channel
|
|
| TIP710 Digital Module The TIP710 is an IndustryPack® compatible module providing 16 digital outputs configured as high side switch with galvanic isolation via optocouplers. The TIP710 directly controls up to 16 lines of all kinds of resistive, capacitive and inductive loads. The outputs are capable of driving 1A continuous per channel at an external supply voltage of 6V to 48V. All outputs resist short-circuits and are protected against thermal overload. After power-on or reset all channels are in the off state. A hardware watchdog clears all outputs in case of trigger failure. The operating temperature ranges from -40°C to +85°C. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Number of Outputs |
16 |
| Output Isolation |
All channels |
| External Output Voltage |
6V DC to 48V DC |
| Output Current |
Max. 1A continuous per channel |
| Output Protection |
Overload, over voltage and short circuit protection, Loss of GND / Loss of Vbb protection, thermal shutdown with restart |
| Output Watchdog |
Can be enabled under software control, 120ms time out |
| Wait States |
IDPROM: no wait states I/O: no wait states |
| Temperature Range |
Operating -40°C to +85°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
279120h |
| Transition Module |
Optional (TIP001-TM-10) |
Manuals
 TIP710 |
Data Sheet |
| TIP710-DOC |
User Documentation for TIP710 |
| TIP710-SW-42 |
VxWorks Software Support for TIP710 |
|
|
The New XycomVME Group
