TIP700
TIP700 16/8 Digital Outputs, High/Low Side Switch
|
|
| TIP700 Digital Module The TIP700 is an IndustryPack® compatible module providing 16 (8) digital outputs with galvanic isolation via optocouplers. The outputs are isolated against each other in groups of two. All outputs resist short-circuits and are protected against thermal overload. The outputs are capable of driving 0.5A per channel. Each output can be configured individually as high or low side switch. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Number Outputs |
TIP700-10: 16 TIP700-20: 8 |
| Output Isolation |
All channels, each two channels shares the same power supply and ground |
| External Output Voltage |
24V DC typical 6V DC minimum 48V DC maximum |
| Output Current |
0.5A maximum (0.4A for voltages over 32V) |
| Short Circuit Current |
0.8A typical (2A maximum) |
| Output Voltage Drop |
1.1V typical @ +0.5A |
| Output Protection |
Overload, short circuit, GND and Vs open wire protection, thermal shutdown |
| Output Watchdog |
Can be enabled under software control, 120ms time out |
| Wait States |
IDPROM: no wait states I/O: no wait states |
| Power Requirements |
175mA typical @ +5V for all modules |
| Temperature Range |
Operating 0°C to +70°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
426220h |
| Transition Module |
Optional (TIP001-TM-10) |
Manuals
 TIP700 |
Data Sheet |
| TIP700-DOC |
User Documentation for TIP700 |
| TIP700-SW-42 |
VxWorks Software Support for TIP700 |
| TIP700-SW-62 |
Windows NT 4.0 Software Support for TIP700 |
|
|
The New XycomVME Group
