TIP672
TIP672 24 lines of RS422 I/O with interrupts
|
|
| TIP672 Digital Module The TIP672 is an IndustryPack® compatible module providing 24 digital differential I/O lines using EIA-422 / EIA-485 compatible ESD protected line driver and receiver. Each line can be individually configured as differential input or differential output. The differential receivers are always enabled, allows determining the state of the I/O lines at any time. This can be used as read back function for lines configured as outputs. All 24 input lines can generate an interrupt. Each input interrupt can individually be enabled and cleared. The signal edge handling is programmable. Configuring an I/O line as output enables the differential transmitter and the I/O line reflects the state programmed in the output register. Optional the I/O lines can be configured for simultaneous update internally and across several IPs by an external clock source. The polarity of the external clock source is programmable. 6 resistor networks (4 x 120ohms) mounted in sockets are used to terminate the differential I/O lines. The resistor networks can be removed or changed in value. After power-on or reset all I/O lines are configured as input and all pending interrupts are cleared. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IndustryPack Logic Interface |
| I/O Interface |
50-conductor flat cable |
| Number of diff. I/O Lines |
24 differential I/O lines |
| Physical Interface |
Based on the SP485 ESD protected differential half duplex RS485 transceiver from Sipex |
| Termination |
120 ohms resistor networks, changeable and removable in groups of four resistors |
| TTL Input |
Programmable simultaneous update feature by external clock |
| Interrupt |
One IP - Interrupt for all 24 I/O lines, three registers for individual interrupt handling |
| Wait States |
No wait states |
| Power Requirements |
100mA typical@ +5V DC |
| Temperature Range |
Operating 0°C to +70°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
Manuals
 TIP672 |
Data Sheet |
| TIP672-DOC |
User Documentation for TIP672 |
| TIP672-SW-42 |
VxWorks Software Support for TIP672 |
|
|
The New XycomVME Group
