TIP670
TIP670 8/4 Digital Inputs, 8/4 Digital Outputs
|
|
| TIP670 Digital Module The TIP670 is an IndustryPack® compatible module with 8 (4) digital inputs galvanically isolated by optocoupler. The individual inputs are potential free in relation to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have an electronic debounce circuit with a freely programmable debounce time. All inputs can generate an interrupt. The signal edge handling is programmable. For systems with particularly fast reaction, each input can be assigned its own interrupt vector. The TIP670 has 8 (4) digital outputs with galvanic isolation via optocouplers. The outputs are isolated against each other in groups of two. All outputs resist short-circuits and are protected against thermal overload. The output drivers are capable of driving 0.5A continuous per channel. Each output can be configured individually as high or low side switch. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Number of Inputs |
TIP670-10: 8 TIP670-20: 4 |
| Input Isolation |
All channels completely independent from each other |
| Input Voltage |
24V DC |
| Input Current |
4.2mA typical @ +24V input voltage |
| Input Switching Level |
12V typical (minimum 9V, maximum 13V) |
| Wait States |
IDPROM: 0 wait state I/O (Z8536 CIO): minimum 3 wait states |
| Number of Digital Outputs |
TIP670-10: 8 TIP670-20: 4 |
| Output Isolation |
All channels, each two channels shares the same power supply and ground |
| External Output Voltage |
24V DC typical 6V DC minimum 48V DC maximumC |
| Output Current |
0.5A (0.4A for voltages over 32V) |
| Short Circuit Current |
0.8A typical (2A maximum) |
| Output Voltage Drop |
1.1V typical @ +0.5A |
| Output Protection |
Overload, short circuit, GND and Vs open wire protection, thermal shutdown 4 |
| Power Requirements |
280mA typical @ +5V (TIP670-10: all inputs and outputs active) 250mA typical @ +5V (TIP670-20: all inputs and outputs active) |
| Temperature Range |
Operating 0°C to +70°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
920276 h |
| Transition Module |
Optional (TIP001-TM-10) |
Manuals
 TIP670 |
Data Sheet |
| TIP670-DOC |
User Documentation for TIP670 |
| TIP670-SW-32 |
pSOS Software Support for TIP670 |
| TIP670-SW-62 |
Windows NT 4.0 Software Support for TIP670 |
|
|
The New XycomVME Group
