TIP610
TIP610 Two 8-bit and one 4-bit TTL I/O Ports
|
|
| TIP610 Digital Module The TIP610 is an IndustryPack® compatible module with a TTL compatible digital I/O interface which is based on the Z8536 CIO, a counter/timer and parallel I/O device. The TIP610-10 implements two independent 8 bit, double-buffered, bidirectional I/O ports, plus a 4 bit special-purpose I/O port. The Z8536 CIO allows configuring each of the two 8 bit ports as input or output. The third I/O port can be configured as I/O or as handshake-control-port. A configuration jumper block permits to configure the two I/O ports as permanent or programmable input/output. Also the 4 bit port is adjustable by these jumpers. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| Digital I/O Controller |
Zilog Z8536 |
| I/O Interface |
50-conductor flat cable |
| Number of Channels |
20 TTL compatible I/O arranged as two 8 bit I/O ports plus a 4 bit control port (2 x OUT, 1 x IN, 1 x I/O) |
| Wait States |
IDPROM: no wait states I/O (Z8536 CIO): minimum 3 wait states |
| Power Requirements |
150mA typical @ +5V |
| Temperature Range |
Operating 0°C to +70°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
1279525 h |
Manuals
 TIP610 |
Data Sheet |
| TIP610-DOC |
User Documentation for TIP610 |
| TIP610-SW-42 |
VxWorks Software Support for TIP610 |
| TIP610-SW-62 |
Windows NT 4.0 Software Support for TIP610 |
| TIP610-SW-82 |
LiNUX Software Support for TIP610 |
| TIP610-SW-92 |
QNX 4 Software Support for TIP610 |
| TIP610-SW-95 |
QNX 6 Software Support for TIP610 |
|
|
The New XycomVME Group
