TIP550
TIP550 8/4 Channel Isolated 12-bit D/A
|
|
| TIP550 Analog Module The TIP550 is an IndustryPack® compatible module and it provides 8 or 4 channels of isolated 12 bit analog outputs. The settling time to 0.01% is 13µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The isolated DAC and the output buffer are powered by an on board DC/DC converterTIP550 is an IndustryPack® compatible module and it provides 8 or 4 channels of isolated 12 bit analog outputs. The settling time to 0.01% is 13µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The isolated DAC and the output buffer are powered by an on board DC/DC converter. Each TIP550 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP |
| I/O Interface |
50-conductor flat cable |
| Analog Outputs |
TIP550-10: 2 groups of 4 channels TIP550-11: 1 group of 4 channels |
| Isolation |
All D/A channels are galvanically isolated from the IP interface |
| Output Voltage Range |
+/-10V or 0V to 10V (selectable by jumper) |
| Setting Time of DAC |
To 0.01% 13µs typical |
| Calibration Data |
In ID-PROM for gain and offset correction for each channel stored in ID-PROM |
| Output Current |
+/-4mA for each channel |
| Load Capacitance |
2nF typical |
| Accuracy |
+/- 1LSB after calibration |
| Linearity |
+/- 1LSB |
| Wait states |
IDSEL: 1 wait state IOSEL: no wait states INTSEL: no wait states |
| Power Requirements |
245mA typical @ +5V, no load 350mA typical @ +5V with 4mA output current for each channel |
| Temperature Range |
Operating -40°C to +85°C Storage -45°C to +125° C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
386641 h |
Manuals
 TIP550 |
Data Sheet |
| TIP550-DOC |
User Documentation for TIP550 |
| TIP550-SW-32 |
pSOS Software Support for TIP550 |
| TIP550-SW-42 |
VxWorks Software Support for TIP550 |
| TIP550-SW-62 |
Windows NT 4.0 Software Support for TIP550 |
| TIP550-SW-92 |
QNX 4 Software Support for TIP550 |
| TIP550-SW-95 |
QNX 6 Software Support for TIP550 |
|
|
The New XycomVME Group
