TIP114
TIP114 10 channel Absolute Encoder (SSI) Feedback Interface
|
|
TIP114 10 Channel Absolute Encoder (SSI) Feedback Interface
The TIP114 is an IndustryPack® compatible module for motion control applications. It offers ten independent SSI interfaces with programmable clock rates from 1µs to 15µs and programmable data bits from 1 bit to 32 bit. The position feedback is provided by an absolute encoder with a synchronous serial interface (SSI) and a corresponding 32 bit (maximum) shift register at the IP. The level of the encoder signals are RS422. The data inputs are galvanically isolated by high speed optocouplers. Each SSI channel can handle a data stream which is encoded in Binary- or in Gray-Code, without or with parity as well as with even or odd parity. Technical Specifications
| Logic Interface |
IndustryPack® Logic Interface |
| Size |
Single Size IP Type I |
| I/O Interface |
50-conductor flat cable |
| Encoder Interface |
Absolute encoder with serial interface (SSI) |
|
Wait States |
No wait states |
|
SSI |
|
|
Interface |
10 independent channels |
|
Data Input |
Optically isolated differential input |
|
CLK Output |
Differential driver (RS422) |
|
Clock Rate |
Programmable from 1µs to 15µs |
|
Data |
Programmable from 1 bit to 32 bit |
|
Interrupts |
Vectored Interrupts are supported |
|
Power Requirements |
70mA typical @ +5V, no load |
| Temperature Range |
Operating 0°C to +70°C Storage -45°C to +125°C |
| Humidity |
5 - 95% non-condensing |
| MTBF |
295763 |
Manuals
 TIP114 |
Data Sheet |
| TIP114-DOC |
User Documentation for TIP114 |
| TIP114-SW-12 |
OS-9 Software Support for TIP114 |
| TIP114-SW-42 |
VxWorks Software Support for TIP114 |
| TIP114-SW-95 |
QNX 6 SoftwareSupport for TIP114 |
|
|
The New XycomVME Group
